Concrete restoration and painting of the dam gates
(customer Alperia Greenpower srl).
Alborelo dam maintenance (Bolzano)
Work on a railway bridge - Chioggia (VE)
Maintenance work on a railway bridge located in the municipality of Chioggia.
Hydro-sandblasting at a pressure of 400bar with quartz sand.
ST2 mechanical and / or manual cleaning.
Airless and / or roller brush application of epoxy and acrylic products.
Treatment of steel structures
Treatments of steel structures at the BOLOGNA FAIR:
- 400Bar water wash,
- Manual / mechanical preparation ST2,
- Application of Surface Tolerant,
- Application of polyurethane finish.
Maxi Tank - Portogruaro (VE)
Work carried out on Maxi Tank (mc 40) at our factory.
First coat application of epoxy phenolic.
Second coat application of epoxy phenolic.
Loaded and ready for departure to the installation site.
Waterproofing - Gorizia
Waterproofing activities for the roofing of the "Fiera di Gorizia" buildings
Tanks- Portogruaro (VE)
Maxi Tanks
Sandblasting and metallization wire Al 99.9
and finishing processes at our factory.
Barchessa - Torre di Mosto (VE)
Beams:
Low pressure sandblasting with fine abrasive
Woodworm and impregnating treatment
Stone walls:
Low pressure sandblasting with fine abrasive
Water repellent treatment for natural stones
Al Bayt Stadium
Structure for stadium Al-Bayt who will be the site of one of the two semi-finals of the World Cup 2022 in Qatar.
Work carried out in Congo
Applied cycle: PAINT SYSTEM 04
sandblasting Sa3;
Application of primer;
Application of epoxy intumescent;
polyurethane finish Application: DFT 3,5mm / 6,6mm
BRIDGE ON THE BOSPHORUS - Istanbul
CYCLE APPLIED:
inner surfaces
Sandblasting Sa 3 with garnet;
TSA Zn 99,9
the sealer application
exterior surfaces:
cycle in accordance with ISO 12944 FOR ENVIRONMENT C5 MH
Sandblasting Sa 2½;
Application of Zinc with epoxy, for 60μ;
epoxy intermediate application to 200μ;
Application of polyurethane, for 60μ
Villa & Bonaldi Chartek
Applied cycle
- sandblasting Sa 2½;
- Zincante epossidico
- Chartek fireproofing
- Polyurethane finish
CORDIOLI & C. SpA Railway Bridge – Bordeaux (Fr)
Cycle applied
- Sandblasting Sa 3
- Metallization Zn/Al 85/15
- Sealer epoxy
- Polyurethane finish
METALLURGICA MEDOLAGO
Ciclo Applicato
- Sandblasting Sa 2½;
- Inorganic zinc
- Silicone finish
- Sandblasting Sa 2½;
- Zinc epoxy;
- Chartek Fireproofing;
- Polyurethane finish
Astaldi Spa - Hangar building c/o Air force base of Amendola (FG)
Cycle Applied : hot galvanized structures
Pont Schuman – Lyon (FR)
Client: Grand Lyon
Cycle applied ACQPA C4ZNV:
- Blasting Sa 3
- TSA Zn / Al 85/15, for a thickness of 120μ;
- Sealer, for a thickness of 30μ
- Intermediate epoxy, for a thickness of 70μ
- polyurethane finish, with a thickness of 50μ.
Brasilia Stadium
Client: Farem SpA
Cycle applied:
- Blasting Sa 3
- Metallization Zn / Al 85/15 to a thickness of 120/1000μ;
- Sealer for a thickness of 30μ
- Intermediate epoxy to a thickness of 100μ
- polyurethane finish to a thickness of 60μ.
Restoration work of art U.S. Embassy in Rome "Sabot"
Sculptor: Alexander Calder
Cycle applied:
- Blasting Sa 3
- Metallization Zn / Al 85/15 to a thickness of 120μ;
- Epoxy Sealer to a thickness of 30μ
- Topcoat.
Redevelopment district of Milan "City Life"
Architect: Zaha Hadid
Cycle applied:
- blasting to Sa 2 ½
- Epoxy Primer
- Polyurea coating with a thickness of 2mm
- polyurethane finish Florurata.
Calatrava Bridge - Venice
Architect: Santiago Calatrava
Cycle applied:
- Blasting Sa 3;
- Metallization Zn / Al 85/15 to 120μ;
- Sealer for a thickness of 30/40μ;
- Intermediate for a thickness of 150μ;
- polyurethane finish to a thickness of 50μ.
New Convention Center Roma EUR "Nuvola"
Architect: Massimiliano Fuksas
Cycles Applied
- Sandblasting Sa 2½;
- Zinc epoxy to a thickness of 60µ;
- Intermediate for a thickness of 120µ;
- Polyurethane finish for 50µ.
- Sandblasting Sa 2½;
- Epoxy primer for 60µ;
- Intumescent R60’;
- Polyurethane finish to a thickness of 50µ
Self-leveling cement-resin application on the pavement of suspended walkways.
West Franklin Project
Client: Rosetti SpA
Cycle applied:
- Blasting Sa 3
- TSA At a thickness of 350μ 99.5
- Sealer silicone to a thickness of 30μ
Intesa San Paolo Tower - Turin
Architect: Renzo Piano
Cycles applied
- blasting to Sa 2 ½
- Zinc epoxy to a thickness of 60μ Intermediate
- to a thickness of 180μ
- finish to a thickness of 50μ
- Blasting Sa 3;
- Al Metallization to 200μ
- Sealer for a thickness of 30μ
- Intermediate to a thickness of 120μ
- Polyurethane finish to a thickness of 50μ.
Consortium for cleaning
Cycle applied:
- Pressure washing to 400 bar.
- Reconstruction of damaged areas.
- Cementitious waterproofing coating for crystallization.
Poliurea
Cycle applied:
- Peening.
- Application bottom wet epoxy.
- Application epoxy primer cooperative.
- Application pure polyurea, 2 mm thick.
- Application flexible polyurethane finish to 60 microns.
Doppelmayr
Cycle applied on hot dipped galvanized surfaces.
- Light Sand
- Application of epoxy primer 40 micron thickness.
- Application of polyacrylic finish for a thickness of 60 microns.
Alcoa
Cycle applied
- Dry high pressure 1500 bar.
- Application of high build epoxy coating 500 microns.
MOSE - Venice
.jpg)
.jpg)
.jpg)
.jpg)
Client: Consorzio Venezia Nuova
Cycle applied:
- blasting to Sa 2 ½
- Primer for a thickness of 50μ
- epoxy reinforced with glass flakes, for a thickness of 500μ
- epoxy reinforced with glass flakes, for a thickness of 500μ.
AUTOVIE VENETE - Ponte Silea
Cement cycle
- Concrete protection systed
- High pressure water cleaning;
- Holas and cleaning repairs using apoxy mortar
- Acrylic primer application
- Top-coat application;
- Abrasive blast cleaning to Sa 2½
- Apoxy zinc application up to 60µ Dry film thickness;
- Apoxy intermediate application 80µ Dry film thickness
- Polyacrylic finish application up to 50µ Dry film thickness.
RIZZANI DE ECCHER S.p.A. - Cable-stayed bridge
cycle applied
- High prassure water cleaning;
- Holas and craking repair;
- Epoxy primer application;
- Elastomeric coating application